GBC 4064WF
Operation Manual
© 2005 General Binding Corporation
Page 13
Swing around control panel arm:
(Fig. 12 – Item A)
The Control panel is on a swing around arm
which will allow the operator to move the
necessary control to each side of the machine.
Control Panel:
(Fig. 12 – Item B)
The Control panel has most the machine
controls to operate the machine.
Nip Pressure Adjustment:
(Fig. 13 – Item A)
The Nip pressure adjustment is a pneumatic
air regulator and a gauge that allows the
operator to adjust the downward pressure of
the pull rolls and main rolls.
Electronic Safety Beam:
(Fig.14-Item A and
Fig. 15–Item A)
Safety light beam is used to protect the Nip
area with out being in the way of normal
lamination operation. Please see the
following chart for sequence of operations:
Figure 12
Figure 13
Figure 14
Figure 15
A
B
A
A
A
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
