GBC Falcon 60+ (-1), Руководство по эксплуатации и обслуживанию

Страница: 22 / 64

22
I
For items 5 -13, refer to Figure 8.
5. SPEED : This means
machine roller speed. Turn
clockwise to increase speed or
counterclockwise to decrease
speed. Speed range is 1 - 10.
6. TEMPERATURE CONTROLS:
The upper and lower heaters
have identical controls, on, off,
increase, decrease and
measure. The top set of controls
relate to the upper heater ( )
and the lower set of controls
relate to the lower heater ( ).
7. TEMPERATURE CONTROL
ON : When pressed,
indicator illuminates and turns
power on to the temperature
controller unit.
8. TEMPERATURE CONTROL
OFF : When pressed, turns
power off to the temperature
controller unit.
9. TEMPERATURE INCREASE
: When pressed, increases
the temperature set point value.
10. TEMPERATURE DECREASE
: When pressed, decreases
the temperature set point value.
11. TEMPERATURE MEASURE:
When pressed, flashes the
actual temperature of the roller.
12. COOLING ON : When
pressed, indicator illuminates
and turns on the cooling fans.
13. COOLING OFF : When
pressed, turns off the cooling
fans.
D. E-STOP: Four emergency stop
buttons exist on the laminator. Two
located on the left and right front
and two on the left and right rear of
the laminator. (Figure 9)
To engage, push (1) any
emergency stop push button.
Power to the motor is removed. To
dis-engage, turn (2) the push
button 1/4 turn counterclockwise.
E. SAFETY SHIELD INTERLOCK
LATCH: (Figure 10) Used to lock
the safety shield into position and
activate an interlock switch. The
interlock latch is located on the left
side of the safety shield. When
pushed to the full left (1), the
safety shield is locked. When
pushed to the full right (2), the
safety shield is unlocked.
Fig. 8
Fig. 9
1
3
4
5 6
10
7
8
9 2
TOP TEMP.
BOTTOM TEMP.
O
C
O
F
O
C
O
F
READY
READY
(5)
(6)
(8)
(7)
(10)
(9)
(11)
(13)
(12)
Fig. 10
(1)
(2)
(D)
(1)
(2)
(E)
Preliminary
Copy