GBC Falcon 60+ (-1), Руководство по эксплуатации и обслуживанию

Страница: 18 / 64

18
I
INSTALLATION
1. Shipping damage should be
brought to the immediate
attention of the delivering
carrier.
2. With assistance, carefully roll
the laminator into position over
flat and even surfaces.
3. The laminator should be
positioned to allow exiting film to
flow freely to the floor (Figure 3)
or a work table. Accumulation of
laminate immediately behind the
laminator as it exits the
equipment may cause the film to
wrap around the pull rollers,
resulting in a “jammed” condition.
4. Avoid locating the laminator near
sources of heat or cold. Avoid
locating the laminator in the
direct path of forced, heated or
cooled air.
5. Leveling of the machine is a
customer option. If you choose
not to level the laminator and
encounter output problems,
please level the machine and try
your application again before
calling for technical support.
Resting the laminator on the
leveling pads prevent the
machine from rolling during set
up, operation or servicing.
(Figure 4)
6. Connect the attachment plug
provided with the laminator to a
suitably grounded outlet. Avoid
connecting other equipment
to the same branch circuit to
which the laminator is
connected, as this may
result in nuisance tripping
of circuit breakers or
blowing fuses.
Fig. 3
Fig. 4
Fig. 5
x 4
Preliminary
Copy