Page 8 - 5
Maintenance
F 60 H Operation and Maintenance Manual
© April 2001 General Binding Corporation
8.5 Chain tensioning
A properly tensioned chain should have a 1/2 in
( 1.3 cm ) of total play at the longest stretch of the chain.
Read and understand the precautions below before
attempting any service work.
W A R N IN G
D o n ot w ear ties, loose fit clothing or
dangling jew elry w hile operating or
servicing the lam inator. T hese item s can get
caugh t in the n ip and ch oke you or you can
be crushed or burned.
R em ove A L L p ow er to the lam inator before
rem oving any cabinet covers.
Y ou m ay be sh ocked or electrocuted!
W A R N IN G
W A R N IN G
A lw ays practice lock ou t/ tag out procedures
w hen perform ing any type of service or
m ain tenance w ork on th e m achin e.
Tools required
• 1/8 inch allen wrench
• 7/16 inch wrench or socket
a) Ensure all power to the laminator has been
removed.
b) Use proper lock out/ tag out procedure.
c) With a 1/8 in. allen wrench, remove the drive
side cabinet cover by;
1) Loosen the three screws along the
bottom.
2) Remove the seven screws along the
top and sides of the cover.
2
PRO-TECH
F 60 H
1
