GBC DocuColor 6060, Руководство по планированию

Страница: 18 / 22

GBC Fusion Punch II with Offset and Bypass Stacker
System Dependencies and Prerequisites
Listed below are the dependencies and prerequisites for
installing the Fusion Punch II.
•
The Finisher Transport Module is required for in-line
connectivity to the printer.
•
A Xerox Document Stacker 5000 is recommended for
stacking paper weights greater than 203 gsm and sizes
smaller than 8.5” x 11” (216 x 279 mm) or larger than 11” x
17” (279 x 432 mm).
•
If there is a transition of an existing FP II to a Nuvera Digital
Production System, the FP II will require an upgrade.
Note: In case the floor at the customer site is very uneven, it is
recommended that the Nuvera IOT is installed and leveled with a
Caster Leveling Kit (kit number 498K07900).
Configuration Guide
The Configuration Guide contains diagrams over the various
Finishing Solutions that are available.
Printer Configurations Finisher Configurations
SFM IOT FTM FPII OFFSET
STACKER FPII BYPASS
STACKER OFFSET
STACKER
SFM SFM IOT FTM OFFSET
STACKER OFFSET
STACKER BYPASS
STACKER FPII FPII DS5000 DS5000
SFM IOT INS FTM DS5000 DS5000 FPII OFFSET
STACKER
SFM SFM IOT INS FTM DS5000 DS5000 FPII BYPASS
STACKER OFFSET
STACKER
Productivity Guide
The Fusion Punch II does not require skip pitches and does not
affect the base printers output speed.
4-2