GBC DocuColor 6060, Руководство по планированию

Страница: 15 / 22

GBC Fusion Punch II with Offset and Bypass Stacker
3. Xerox iGen3
®
Digital Production Press
Performance Specifications
Listed below are the Performance Specifications for the Fusion
Punch II.
Punch / Stacker Specifications
Paper Size / Weight Paper Size: 7” x 10” (178 x 254 mm) – 11” x 17” (279 x 432 mm) / A3
Paper Weight: 16 lbs (60 gsm) – 110 lbs index, 250 gsm (12 pt.)
Stacker Capacity Stacker 2,500 sheets
Input Heights 34” (860 mm) and 40.2” (1021 mm)
Limitations
•
Punching is limited to 7” x 10” (178x 254 mm) size up to 8.5”
x 11” / A4, long edge only including tabs and 11” x 17” / (279
mm x 432mm) / A3 can by punched short edge only.
•
The validated configuration is limited to the Fusion Punch II
with a single Offset Stacker. This limitation will cause a stop
in production for as long as 10 minutes every time the
operator needs to empty the stacker. (The Fusion Punch II
with Bypass Stacker is not an available option on iGen3.)
•
Although the maximum sheet weight capability of the iGen3
is 350 gsm, the Fusion Punch II is limited to 110 lbs index,
250 gsm (12 pt.).
•
Clear covers and acetates are not supported.
•
Depending on media characteristics, 11” x 17” / (279 mm x
432mm) / A3 may have stacking limitations.
System Dependencies and Prerequisites
•
If installing a new FP II on an existing iGen3 installation, a
Xerox iGen3 Finishing Interface kit (product code UYR) must
be ordered.
•
The Fusion Punch II requires an iGen3 Upgrade Kit, part
number: 7610528.
3-1