Page 4 - 8
Installation
Digital Feeder Operation and Maintenance Manual
© GBC Pro - Tech February 2000
c) Gently unwrap the shrink wrap from around the
feeder and conveyor.
CAUTION
Do not use an open blade to cut the shrink
wrap from the machine. You can cause
damge to the equipment!
d) Remove the shipping bolts from the feeder and
have the feeder lifted from the skid and placed
on the floor by licensed riggers.
W A R N I N G
The Digital Feeder is a large and heavy
piece of equipment. It is necessary to employ
L I C E N S E D R I G G E R S O N L Y t o m o v e t h e
machine. The machine is not designed to be
tipped up or sideways in any way. Such
action disturbs the exact alignment of the
moving parts of the machine and requires
extensive realignment. You can be crushed
or seriously injured.
GBC Pro-Tech's warranty does not cover
malfunction of the equipment due to
mishandling and / or tipping. GBC
Pro-Tech bears no responsibility for
personal injury or damage due to
moving the feeder improperly.
INFORMATION
e) Inspect the machine for any obvious shipping
damages.
f) Move all packing materials to a safe distance
from the equipment and dispose of properly.
INFORMATION
The shrink wrap is not recyclable, therefore
it must be discarded.
g) Use two people to carefully roll the feeder and
conveyor to the desired location.
W A R N I N G
Do not attempt to move the Digital Feeder
across anything other than a flat level
surface . You can be crushed
or seriously injured.
h) Continue with 4.6 Set up.
