Page 4 - 20
Installation
Digital Feeder Operation and Maintenance Manual
© GBC Pro - Tech February 2000
c) Press TABLE
on the feeder control
panel.
TABLE
STOP
- Sheet table stops once the table lower limit
switch is engaged. Refer to Figure 4.9.1
Limits switches.
- The audible beeping will stop when the table
upper limit switch is reset.
d) Loosen the left and right head unit adjust knobs
and slide the feeding head unit to its far most
back position.
Right
head unit
adjust knob
Feeding head unit
Left
head unit
adjust knob
e) Position a 3 inch ( 7.6 cm ) stack of 8.5 x 11
inch paper ( 21.6 x 27.9 cm ) on the sheet table
flush and center against the center guide.
Sheet stack
Center guide
f) Press TABLE
on the feeder control
panel.
TABLE
STOP
- Sheet table stops once the stack height limit
switch is engaged.
Stack height limit switch