GB Instruments Wire-Tracker GET-4110K, Инструкция по эксплуатации

Страница: 6 / 30

5
To enhance the signal strength and
increase the operating range of the
receiver, the black alligator clip may
be connected to an external
equipment ground. This will greatly
increase the functional range of the
receiver.
To prevent interference, disconnect
the cable in the house from the cable
company wiring. This connection can
be found where the main cable enters
the house. Connect the co-axial plug
to any co-axial jack in the house.
Trace the wiring as described above.
(GET-4110K Only)
• Do not use on any component of
the ignition system.
• Before using this device check
the vehicle’s electrical wiring and
disconnect any component that is
Tracing Co-axial Wiring
Tracing Automobile Wiring
!
WARNING