12
•
troubleshooting within the warranty period is implemented by the manufacturer or its authorized
service, while maintenance and repairs outside the warranty period is carried out according to
agreement with the customer.
•
Devices must be cleaned and inspected regularly and inappropriate parts should be replaced if
necessary.
WARNING!
Warnings for maintenance works:
•
All disassembled components need to be protected during the implementation of works inside the
device.
•
During operation it is prohibited to remove the protecting parts from the device.
•
In case of gas leaks from the system it is required to implement the intervention in a way that
does not threaten human health and has no harmful influence on the environment.
•
Electrical connections and maintenance must be carried out according to the standards and
legislation, including regulations on safety at work.
Warnings for operators, maintenance and installation workers:
•
Installation, repair and maintenance works must be carried out, whenever the appliance does not
operate according to exactly determined instructions.
•
After completing repair and maintenance works or other interventions in the machine the parts
designated for protection and safety need to be reattached to the original locations in order to be
able to perform their function.
•
Restarting the device is performed by the same procedure as the initial start-up.
•
Changes and modifications to the machine are permitted with the written consent of the
manufacturer, when using original parts. In all other cases of alterations, repair or maintenance
works manufacturer shall not be liable for the faulty operation of the device.
•
Also, the manufacturer does not bear any responsibility for the operation of the device in case of
non-compliance with the manufacturer's instructions, and when the device is operated contrary to
the working conditions and characteristics determined by the manufacturer.
W A R N I N G
Maintenace, cleaning and repairs can only be carried out by professionals.
Professionals
Persons who due to their technical training, knowledge and experience, as well as knowledge of relevant
standards, are able to assess the extent and type of necessary works, and their associated hazards.
To ensure interference-free operation of the device it is necessary to regularly clean and maintain the
equipment.
N O T E
Maintenance and cleaning of certain components of the device or additional
parts is described in the
documentation of the producer.
!
