ZZZ-187.W1209MR.0629-21.GP.EN.doc
WEB VERSION
11
TOOLS REQUIRED:
Screwdriver (Philips #2)
Knife
File (smooth)
Needle-nosed pliers
Rubber mallet
Step ladder (minmum 6' in height)
Spatula
Power drill
Tube of silicon
Drill bit 5/16" cement
(according to surface)
Round file + flat
2”x4”x8” wood
BEFORE STARTING:
Ensure that you have a solid base,
such as concrete or wooden deck,
not slanted more than 1” per 8’. Avoid
installing unit adjacent to trees or a sloped
roof, as snow and ice may slide onto the
solarium and cause it to collapse.
Please don't destroy boxes until completely assembled.
STEP #1
Decide the position of the door frames before assembly according to where you intend to slide the
door. At the front of the solarium, use frame D3 for the opening of the door and B3 for the direction
of the door when open. Ensure frames A-3 ½ are at the front of the sides. Use E3 between frame
ends and use two (2) K3 joints for corners, with the screw hole upward.
Look for the sticker that will show you which side is up.
(See sketches on page 7)
NOTE:
When sliding the connectors, shake the frame so that they will slide easily. Do not use tools to
force. If needed, clean the paint with a file and make sure the ends of the frame and joints are not bent
or warped. If so, use the needle-nosed pliers to straighten.
STEP #2
Slide the vertical guides Vv-3 left and Ww-3 right
into the 2 ends of the frames along the grooves,
shaking while sliding for easier movement.
