GAYLORD ClearAir RSPC-ESP SERIES Скачать руководство пользователя страница 69

Страница: 69 / 70

LIMITED WARRANTY

THE GAYLORD

ClearAir

POLLUTION CONTROL UNIT

LIMITED WARRANTY

The Gaylord ClearAir

Pollution Control Unit is warranted by GAYLORD INDUSTRIES

to be free from defects of material and workmanship under normal use when installed,

operated and serviced in accordance with factory recommendations.
GAYLORD INDUSTRIES’ obligation under this warranty shall be limited to repairing

or replacing at its option any part of said equipment which GAYLORD INDUSTRIES’

examination shall disclose to its satisfaction to be thus defective, for a period of one

(1) year from the date of installation provided proper and acceptable evidence of such

installation is recorded at the factory, or 18 months from date of shipment whichever

occurs first.

GAYLORD INDUSTRIES SHALL NOT BE RESPONSIBLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES RESULTING FROM A BREACH OF THIS WAR-

RANTY.

All replacement parts furnished under this warranty shall be F.O.B. Gaylord Industries

Tualatin, Oregon. The owner shall pay the necessary freight delivery charges, and nec-

essary labor for removal and installation of parts, and any federal, state or local taxes.

SPECIFIC ITEMS NOT COVERED BY THIS WARRANTY:

1. Fan belts if equipped with an exhaust fan.
2. Pre filters, bag filters, final filters, and Green Matrix LP media if equipped with odor

control.

3. Routine maintenance and cleaning as spelled out in The Gaylord ClearAir

Model

RSPC-TPF Series Unit Technical Manual.

4. Malfunction or improper operation caused by fluctuating electrical or power surges

or improper installation.

This is the sole warranty with respect to the aforesaid items. NEITHER GAYLORD

INDUSTRIES OR ANY OTHER PARTY MAKES ANY OTHER WARRANTY OF ANY

KIND WHATSOEVER, EXPRESSED OR IMPLIED, AND ALL IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH

EXCEED THE AFORESAID OBLIGATIONS ARE HEREBY DISCLAIMED AND EX-

CLUDED FROM THIS AGREEMENT.

Содержание ClearAir RSPC-ESP SERIES







































































Результаты поиска

Содержание ClearAir RSPC-ESP SERIES

Отзывы:

Похожие инструкции для ClearAir RSPC-ESP SERIES

Бренды по названию

Популярные бренды

GAYLORD ClearAir RSPC-ESP SERIES, Техническое руководство

Результаты поиска

Содержание ClearAir RSPC-ESP SERIES

Отзывы:

Похожие инструкции для ClearAir RSPC-ESP SERIES

Бренды по названию

Популярные бренды