background image

12

FORMULA G-510 is the only cleaner recommended by Gay-
lord Industries for use in the washdown system of The Gaylord
Ventilator.  FORMULA G-510 is a concentrated colloid cleaner
specially formulated to remove the daily accumulation of
grease inside The Gaylord Ventilator without damaging the
rubber and synthetic parts of the detergent pumping system.
FORMULA   G-510 is biodegradable, safe for kitchen person-
nel, and has a variety of uses.

DILUTION OF FORMULA G-510 FOR
VENTILATOR CLEANING

Normal Cleaning
For ventilators covering cooking equipment such as broilers,
griddles, fryers, or any other heavy grease producing equip-
ment, fill the detergent tank with full strength FORMULA
G-510.

Light-Duty Cleaning
For ventilators covering light grease producing equipment such
as ovens, kettles, steamers and ranges, fill the detergent tank
with a mixture of one part FORMULA G-510 to one part water.

Cleaning the Ventilator Exterior
Mix one part FORMULA G-510 to twenty parts water in hand
spray bottle.  Spray on and wipe off.  NOTE:  Once a day, this
same solution should be used to clean the front of the fire
damper and main grease extracting baffle.

FOR OTHER CLEANING JOBS

The colloidal action of FORMULA G-510 makes it a cleaner
especially well-suited for use in kitchens.  The colloids break
up dirt and grease into millions of tiny particles that constantly
repel each other.  These particles cannot recombine or
redeposit on a surface and are, therefore, easily washed away.
FORMULA G-510 is biodegradable and contains no harsh
chemicals, yet offers outstanding performance on the tough-
est cleaning jobs.

Use a mixture of one part FORMULA G-510 to twenty parts
water for:

VINYL/PLASTIC/WALLS...Removes dirt, grease,
food deposits and fingerprints.
REFRIGERATORS...Removes dirt, spilled
milk, blood, mildew and objectionable odors.
RESTROOMS...Add a disinfectant to clean all
fixtures, walls, floors, etc.

Use a mixture of one part FORMULA G-510 to five parts water
for extremely heavy grease build-up, such as on the floor and
on equipment around deep-fryers.  Spray on and rinse or wipe
off.  For extremely soiled areas, gentle agitation, followed by
a soaking period, will result in more thorough cleaning.

DON’T be afraid to experiment with FORMULA G-510 because
it contains no phosphates, nitrates, enzymes, sulfates, sul-
fonates or silicates.

DETERGENT FOR THE WASH SYSTEM

LIMITED WARRANTY

G-510 CHEMICAL DIVISION warrants that FOR-
MULA G-510 will not cause cleansing agent     dam-
age to the rubber and synthetic parts of the injection
pump (“O” rings, diaphragms, washers, tubing, and
other such parts) used with The Gaylord Ventilator,
Heat Reclaim Unit, or Pollution Control Equipment.
G-510 CHEMICAL DIVISION’S obligation under this
warranty and any warranties implied by law shall be
limited to repairing or replacing, at its option, any of
said parts which
G-510 CHEMICAL DIVISION’S examination shall
disclose to its satisfaction to have been damaged by
the use of FORMULA G-510 for the life of the
detergent pumping system.  This warranty shall not
cover damages caused by any other detergent.  The
use of any other detergent shall void this warranty.

All repairs and replacement parts under this war-
ranty shall be F.O.B. G-510 CHEMICAL DIVISION’S
factory.  The owner shall pay the necessary freight
and delivery charges; also      removal and installation
costs.  Any federal, state or local taxes are also
extra.  Requests for repairs or replacement parts
should be made to G-510 CHEMICAL DIVISION,
P.O. Box 1149, Tualatin, Oregon 97062-1149.

This is the sole warranty with respect to FORMULA
G-510. G-510 CHEMICAL DIVISION MAKES NO
OTHER WARRANTY OF ANY KIND WHATSO-
EVER, EXPRESSED OR IMPLIED, AND ALL IM-
PLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR       PURPOSE
WHICH EXCEED THE AFORESAID OBLIGATION
ARE HEREBY DISCLAIMED AND EXCLUDED
FROM THIS AGREEMENT. G-510 CHEMICAL DI-
VISION SHALL NOT BE RESPONSIBLE FOR INCI-
DENTAL OR CONSEQUENTIAL DAMAGES RE-
SULTING FROM A BREACH OF THIS WARRANTY.

IMPORTANT

If a cleansing agent other than FORMULA G-510 is used with
The Gaylord Ventilator injection pump, it is recommended that
a warranty similar to the above be obtained from the manufac-
turer of said product.

For more information contact:

20/10 Products
P.O. Box 7609
Salem, Oregon 97303
1-800-286-2010
FAX: 503-363-4296
email:[email protected]

Содержание CG Series

















































Отзывы: