7
8
Inspection, maintenance and repair
Warning! Disconnect the LED fixture from mains before performing any maintenance or repairs.
Warning! Do not connect or disconnect the LED fixture under load.
Warning! Do not open or disassemble the LED fixture, it contains no serviceable parts inside. Opening the LED fixture can
be dangerous and will void the warranty.
Warning! Always allow for a cool down period of at least 30 minutes before touching the LED rails.
Caution! Do not clean the LED fixture with detergents, abrasives, or ANY other POTENTIALLY aggressive substances.
•
Regularly check the LED fixture for dust or dirt buildup. Clean if necessary with 70% Isopropyl Alcohol and apply with a
non-abrasive cloth. Contamination may cause overheating and decreased performance. Clean the outside of the LED fixture
using a dry or damp cloth.
•
Regularly check the cables of the LED fixture to ensure they are undamaged.
8.1
How to disconnect the Wieland RST16i5 plug
Warning! Do no connect or disconnect the Wieland RST16i5 plug while the fixture is in operation.
•
Switch off mains power.
•
Turn the ring on the Wieland RST16i5 female connector counterclockwise and
pull the Wieland RST16i5 female connection from the LED fixture (fig. 9).
9
Storage and disposal
•
Store the LED
fixture in a dry and clean environment, with an ambient
temperature of -4~122° F / -20~50° C.
•
The product must not be discarded as unsorted municipal waste, but must be
collected separately for the purpose of treatment, recovery, and environmentally
sound disposal.
10
LIMITED WARRANTY:
When purchased from an authorized Hawthorne dealer, this product is covered by a
LIMITED WARRANTY, available at hawthornegc.com/warranties. You can also obtain
the Terms of Sale and Limited Warranty by calling Hawthorne toll-free
at: 1-888-478-6544 or writing Hawthorne at: Hawthorne Hydroponics LLC, 3204 NW 38th Circle, Vancouver, WA 98660,
Attn: Customer Service.
1
2
9.
