5
7.2
Connecting up to 512 LED fixtures
•
Remove the dummy plug from the input port on the first LED.
Note: Keep the dummy in a safe place! The dummy is necessary to operate the LED fixture in standalone mode.
•
Use the controller cable (RJ45 to RJ45) (fig. 6A) to connect the controller input port (fig. 6B) on the first LED.
•
Remove the dummy from the input port on the second LED.
•
Use interconnect cable (RJ45-RJ45) to connect the output port (fig. 6C) of the first LED fixture to the input port of the
second LED fixture.
•
Repeat these steps to connect up to 512 LED fixtures.
Warning! Ensure the power cord and the controller cables do not touch any of the LED rails.
A
B
IN
OUT
POWER
C
6.
