9.1.
Placement and replacement of the lamp
Warning! Always allow for a cool down period of at least 30 minutes before
touching the lamp or reflector.
Caution! Do not touch the lamp with bare hands as this will damage the lamp.
Always use a fabric glove to handle the lamp.
Caution! Only use lamps specified by Gavita (see paragraph 3.3).
Note: The lamp must be replaced every year or after 5000 lighting hours,
whichever one comes first.
•
Switch off mains power.
•
Hold the lamp with a fabric glove to prevent it from falling. Use a protective glove
if the lamp is damaged.
•
Open the lamp holders by sliding them outwards (11).
•
Carefully take the lamp out of the fixture (12).
•
Install the new lamp with the getter (A) near the ballast (13), with the glass
vacuum seal pointed downwards (Philips lamp) or sideways (Gavita lamps).
•
Use a fabric glove to carefully press the lamp in the fitting until the metal springs
hold the lamp.
•
Close the lamp holders by sliding them inwards (14).
•
Switch on mains power.
11.
12.
A
13.
14.
