9.2.
Placement and replacement of the reflector
Warning! Always allow for a cool down period of at least 30 minutes before
touching the lamp or reflector.
Note: Gavita recommends replacing the reflector* after 5000 lighting hours.
Depending on the environment and contamination levels the reflector will degrade.
The vega/Miro™ aluminum can not be cleaned without damage. Therefore we
recommend to change the reflector once every year. Also replace the lamp when
replacing the reflector.
* The reflector is delivery dependent, it may differ from the image.
•
Switch off mains power.
•
Remove the lamp from the fixture (see paragraph 9.1).
•
Support the reflector on the side of the reflector lever to prevent it from falling
(11).
•
Move the reflector lever up to retract the two pins holding the reflector in place
(12).
•
Remove the reflector (13).
•
Place the new reflector. Ensure the reflector lever is in the opened position to
allow the reflector to pass.
•
Ensure the holes in the reflector are aligned with the pins in the fixture (14).
•
Release the reflector lever so its two pins hold the reflector in place.
•
Insert the lamp in the lamp holder (see paragraph 9.1).
•
Switch on mains power.
15.
16.
17.
18.
