manualshive.com logo in svg

Gavita Master Controller EL3, Инструкция по эксплуатации, Страница: 13 / 24

Поделиться
Скачать
Gavita Master Controller EL3 Скачать руководство пользователя страница 13

™

11.2 

 Wiring Test 

Check the status of the fixture’s communication wires through the “Wiring test” function. Choose to start the test with one 

line or two lines at a time. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Click "Start" to begin the test. After the test starts, all the lights on the line will switch between on and off for five seconds. 

The user can judge whether the lights are normal or not according to the fixture behavior: 

 

(1) The light is always on, and the front and rear lights are normal. Check the light input interface. 

(2) The light is always off, and the front and rear lights are normal. Check the light input interface. 

(3) The light is always off, but the light behind it is always on. Check the cable between the fixture and the previous fixture.

11.3 

 Software Updates 

The user can update the EL3 to take advantage of new features and capabilities. These updates can be found on https://

gavita.com/EL3. Using the included USB drive, download and place the EL3 APK of the software to be upgraded in the EL3 

directory of the USB drive. Insert the USB flash drive into EL3, click “Update” to confirm the upgrade application, wait for 

the application to install successfully, and reboot automatically. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Содержание Master Controller EL3

























Отзывы:

Нет отзывов