
S117 & S117.250 |
User Manual
Appendix
| 55
9.2 Troubleshooting
OMNI 2
Communication/Power Issues
Communication with the simulator cannot be established
Controlling tablet is too far
away from simulator
Minimize the distance between simulator
and the tablet. Should not be over 10 meters
away
Manikin is not paired
Disconnect the simulator from the power
supply, turn off bluetooth on OMNI 2 tablet.
Plug the simulator and turn on bluetooth.
Power supply is not connected
to simulator
Ensure that the power supply is connected
to the simulator
Miscellaneous Issues
CPR is not detected
Compression are not detected
Tap the Gear on the top right and select
Calibration. Reset the compressions sensor
Ventilations are not detected
Tap the Gear on the top right and select
Calibration. Reset the Ventilations sensor.