NOELLE S554.100 |
User Manual
Working with NOELLE | 31
3. Lubricate the vulva and cer-
vix internally and externally
using silicone lubricant.
4. Attach the umbilical cord to
the baby.
WARNING: Route the cord so that it does not bind in the mechanism.
The umbilical cord can be wrapped around the fetal neck or coiled out
of the way.
5. Attach the umbilical cord
to the placenta.
6. Lubricate the placenta and
umbilical cord.
7.
Place the placenta against
the abdominal wall.
2. Connect the syringe with
tubing to one port and the
drain tube with clamp to the
other port as shown.
3. Leave the drain tube clamp
opened and depress the
syringe until all air has been
pushed from the IV system
and fluid runs from the drain.
4. To simulate a patient with no accessible peripheral IV sites, connect
only the syringe. Pull the plunger to create suction, which will col-
lapse the veins. Disconnect the syringe tube from the arm port while
maintaining suction. The port will seal, and the veins will remain
collapsed.
5.5 Obstetrics
Normal Labor and Delivery
To complete a normal delivery, follow the instructions below:
1.
Remove the abdominal cover.
2. Lubricate the articulating
birthing fetus.
WARNING: Always lubricate the
baby and the birth canal prior to
every delivery. Poor luibrication
may damage the birth canal, fetus,
and the birthing mechanism.
