Instructions for SL500DC/SL800DC
www.gatexpertstore.com
22
Remote Control Mode Instruction:
There are two modes available for remote control under this control board. Users may pair
the remote control in their required mode.
1. Single button mode: Open/Stop/Close of the gate opener is controlled by only one
button on the remote control.
2. Three button mode: Open/Stop/Close of the gate opener is controlled by three different
buttons on the remote control.
Single Button Mode Learning (L1)
Under this mode, one of the remote control buttons which is paired to the gate opener can
individually control the operation of one opener. The rest buttons on this remote control can
be used to pair to other openers.
Figure 25
A. Operation Instruction
1. Press and hold “-” button for 2 sec. to enter into remote control management mode.
Indicator light L1 will be steady on.
2. Press “SET” button once to enter into single button learning mode.
All indicator lights
will flicker repeatedly from L1 to L5. (If an alarm lamp is connected, it’ll blink as well).
3. Press the button which is to be paired on the remote control twice.
The indicator lights
L1-L5 will be on in sequence, then all will flicker once and off. (If an alarm lamp is
connected, it’ll be on for one sec.). Learning is complete thereafter.
Gate 1
Gate 2
Gate 3
Gate 4
