Instructions for SL500DC/SL800DC
www.gatexpertstore.com
5
Installation
Before You Start
·
SL500DC/SL800DC Sliding Gate Automation Kit is suitable for powering the opening and
closing motion of gates up to 500, 800kg in weight, up to a length of 12m.
·
Gate motion is achieved by the rotating output gear of the gate opener driving the gear rack
(sold separately) fitted to the moving gate.
·
The gate opener requires you to press the remote control once to open, and once again to
close. This is a safety feature to ensure safe operation.
·
The opener must be fitted within private property, never externally to a property’s boundary.
Any works done to the gate opener must be completed whilst the power is off and the opener is
unplugged. Any modifications/alterations/works to AC power components must only be completed by
a licensed electrician
Tools Required
·
Tape measure
·
Level
·
12mm concrete drill and hammer (when uses expansion screws)
·
Phillips head screwdriver
·
Straight screwdriver
Example Sliding Gate
Gate Track and Track Wheels
Gate End Catch
Gate Guide Rollers
Gate Stop
Figure 4
Please ensure that the gate opener power cable is not plugged in at any stage before Step 8.