Gateway Solo 3100, Руководство пользователя

Страница: 50 / 94

46 Using Your Gateway Solo 3100 Notebook
2. Insert the modem face up, 68-pin connector first, into the PC Card
slot. Press the modem gently but firmly into the PC Card slot until it
will go no farther.
Do not force the modem.
3. Plug the telephone jack end of the modem cable into the wall jack. Use
an extension telephone cable if you need a longer cord.
Enabling the modem
Some modems have software drivers that need to be installed to enable the
modem after the modem card is installed. The drivers are usually on a
separate diskette or CD-ROM, not preloaded on the Windows® 95 or
Windows® 98 CD-ROM.
1.
Make sure the external diskette drive is installed.
2.
Insert the modem into the PC Card slot.
3.
The New Hardware Found window appears. Click the
Driver from disk
provided by hardware manufacturer
button, then click
OK
.
4. The
Install From Disk
window appears. Insert the driver diskette into the
diskette drive.
5.
On the command line provided, type A: then click
OK
.
6.
The
Select Device
window appears. Select your modem and click
OK
.
Dual-toned beeps indicate that the modem is now enabled.
1. Make sure the external diskette drive is installed, then insert the
modem into the PC Card slot.
To install drivers for Windows 95
To install drivers for Windows 98
Caution!
Do not use your modem on
a digital phone line. If you
attempt to use the modem
on a digital line, it could
damage your modem.