Gateway Notebook, Справочное руководство

Страница: 79 / 130

www.gateway.com
73
8
If you are removing a module, gently press outward on
the clip at each end of the memory module until the
module tilts upward.
9
Pull the memory module out of the slot.
10
Hold the new or replacement module at a 30-degree
angle and press it into the empty memory slot. This
module is keyed so it can only be inserted in one
direction. If the module does not fit, make sure that the
notch in the module lines up with the tab in the memory
bay.
11
Replace the memory bay cover, then tighten the cover
screw.
12
Insert the battery, then turn your notebook over.
13
Connect the power adapter, modem cable, and network
cable.
14
Reconnect all peripheral devices and replace any
Express cards.
Clip
Clip