Gateway ALR 7200R, Руководство пользователя

Страница: 39 / 60

Memory/Processor Problems 31
Memory/Processor Problems
Memory errors were detected during system start up.
A new processor is not recognized by the system.
Probable Cause Solution
Memory was added or
removed, and the new
configuration was not
saved in BIOS Setup. Enter BIOS Setup and save the new memory
configuration.
The memory was installed
incorrectly. Check the memory for proper seating and
orientation.
A memory chip is faulty. Replace the card with the faulty chip. (Third-party
diagnostic programs can help determine which
chip or memory segment is failing.)
Probable Cause Solution
The processor was
installed incorrectly or in
the wrong socket. Check the installation. The processor should be
recognized automatically if it was installed
correctly.
The processor speed was
not selected on the system
board. If your system board lets you to select the
processor speed, make sure you have selected the
proper speed.
A pin was bent on the
processor during
installation. Remove the processor and inspect it for damage.
If a pin is bent, very carefully try to straighten it.
3437.boo Page 31 Wednesday, October 7, 1998 4:01 PM