Gateway ALR 7200R, Руководство пользователя

Страница: 17 / 60

Installing the System Drawer 9
4. Mark the screw hole locations onto the vertical mounting strips in the
cabinet as shown on the template. The marks will locate the mounting
holes of the rail brackets and front panel.
5. Attach the front bracket to the front cabinet vertical mounting strip
using two screws as marked. Attach the rear bracket to the rear
cabinet vertical mounting strip.
6. Repeat steps 4 and 5 to mount the second set of brackets.
7. To secure the rails to the mounting brackets, begin with the rear of the
rail first. Slide inner rails forward to gain access to mounting holes. If
the latch locks the rail into place, release the latch to allow the rails to
slide freely.
8.
Install the mounting screws through the rail into the rear mounting
bracket.
9. To secure the front of the rail, slide inner rail so that the opening aligns
with the mounting holes.
10.
Install the mounting screws. Verify that the inner rails slide in and out
freely.
3437.boo Page 9 Wednesday, October 7, 1998 4:01 PM