Gateway 210, Руководство пользователя

Страница: 58 / 58

MAN 210 PROJECTOR USR GDE R0 3/03
Quick Setup
To connect the projector to your computer for a simple presentation:
1. Connect the video adapter to the back of the projector and tighten the
two thumbscrews.
2.
Place the projector on a sturdy cart or table close to your computer and
an electrical outlet.
3. Point the projector lens towards a blank wall or projection screen.
4. Plug the VGA cable into the blue VGA port on the back of the video adapter,
then plug the other end into the blue video port on the back of your computer.
5.
Plug the power cable into the power connector on the left side of the projector,
then plug the other end into a correctly grounded electrical outlet or surge
protector.
6. Use your computer to control the presentation.
Read this guide for additional information.