Gateway 210, Руководство пользователя

Страница: 42 / 58

38
Using the Gateway 210 Projector
www.gateway.com
8
Gently press the new lamp module into the lamp bay. The lamp module
is keyed so it can only be inserted in one direction. If the lamp module
does not fit, make sure that the cable connections line up with the
connectors in the lamp bay.
9
Replace the three lamp module retaining screws.
10
Replace the lamp bay access panel, then replace the access panel screw.
11
Turn the projector over.
12
Connect the power cable and all external cables.
Important Make sure that the lamp bay access panel is securely in
place. If the access panel is not securely in place, the
projector will not start.