Gates Z3 Housing, Руководство по установке, использованию и уходу

Страница: 40 / 53

Z3 Setup Page 40
Water Alarm (Optional)
If you have the optional water alarm installed there are three alarm conditions to know:
Condition LED Siren
New Battery
(Insertion) Bright Intense blink
while siren plays Ascending tones played 4 times
Water Intrusion Bright Intense Blink Grating Warble sound. Alarm will
sound for duration of detection.
Low Battery Low Intensity fast blink Descending tones played 8 times
pausing approx. 20 seconds between
plays after alarm test or water
detection.
The alarm can be tested anytime by shorting the detection contacts that lead to the
water alarm transducer. The water detection condition will activate for 6 seconds. If the
battery is drained the low battery condition will sound.
The water alarm requires a single 6V battery type A544.
Your battery should be removed when stored (e.g. between dive trips). Check the
battery prior to every dive to ensure proper operation. Change when indicated.
CAUTION : You must wait a minimum of 30 seconds between battery insertions to allow
the unit to fully discharge.
The red LED alarm
signal will appear
here on Z3.