Alexa Housing Operation
Page 41
The surface control cable plugs into the bulkhead connector on the left side of the
housing as shown. The surface end connects to the ‘CAN connection on The Hand
Controller (THC).
Test.
Install a battery to THC, and ensure the ‘CABLE / BATTY’ switch is set to
‘BATTY’.
Install a battery on the Alexa camera and the WMD should power on.
The Servo Motor Drivers may calibrate. Once complete, you should have full lens
control of focus, iris and zoom from The Hand Controller.
Plug in the surface cable here.
Plug in the surface cable to the
Element Technica Hand
Controller here.
