Alexa Housing Operation
Page 40
Route Motor Cables.
Servo Motor cables will route along the lower left side of the
inside housing as shown in the photo.
Route Power, CAN and surface control cables.
As noted in the photo, the
power cable plugs into a D-Tap location on the battery mount.
The CAN cable is a permanent cable installation on your housing. It is routed
through the dovetail rail on the housing as shown. Plug this into the CAN location
on the WMD.
Route the motor cables
along the lower left side of
the housing as shown.
Tie them off to the 15mm
rods to avoid interference
with housing closure.
Plug in the power and
CAN connections on this
side of the WMD.
CAN connector
