Opener
Using bolts (M8x20) and washers (8) mount the operator to the base. Before tightening the
bolts insert the operator cover, make sure there is no more than 2mm between the cover and
the chain box. Check the operator and make sure it is lined up with the gate.
Fig.4
Chain Brackets
Use the appropriate bolts to attach the chain bracket to the frame of the gate. If the gate is of
square-frame style, use the square bolts shown. Align the chain bolt with chain hole on the
chain box.
Spring washer (
Φ
8)
Plain washer (
Φ
8)
"L" bracket
Square bolt
Nut (M8)
Chain bolt
Master link
Nut (M6)
Spring washer (
Φ
6)
Plain washer (
Φ
6)
Gate
Square frame
Fig.5
