AI282s v3 and SP25 Stop Arm Camera System Install Guide
7
4. Drag points to adjust the detection zone, then
click on ‘
Save
’.
Note1:
Align the detection zone to cover the lanes where vehicles are to be detected.
Note2:
Each time the stop arm is deployed, the counter will start at 000, and count 1 for each
violation detected (e.g.,
001, 002, 003…)
. The counts display on the On-Screen Display (OSD) as
shown in the above images circled in red.
5. Navigate to
Preferences-> Alarm-> Base-> Violation
. Enable
“
Violation F
”,
and then click on
“Save”.
