- 39 -
Voltage
Low Voltage Protection is OFF by default. If Enabled
Highs; Lows and Measurements in-between will be
displayed as part of the Device Status within G4 viewer.
Emerg. Alarm
Determines if the Driver Alert Button will activate an
alarm when pressed by the driver of the vehicle.
If Alarm is set to ON a marker will appear as part of the
OSD and video playback file.
LOCK sets if the video file produced will be overwritten
when the SD card has reached its capacity.
Peripheral
PTZ
RESERVED FOR FUTURE DEVELOPMENT.
Ext. COM Setup
COM1 and COM2 are reserved for RS232 connections
and are currently not supported.
COM3. This relates to 485-3 (Driver Alert Button) on
CAB000323.
COM4. This relates to 485-4 (G-Sensor) on CAB000323
Figure 27: EXT. COM Setup Default Values.