26 -
IO ALARM
Displays Alarms triggered by Stop Arm, Warning Lights, Brake, etc. These Alarms are configured in
Advanced
System
Menu
Event
ACCELERATION
Displays Events generated by the G-Sensor configuration. Advanced
System
Event
Acceleration
SPEED
Displays Events recorded generated by the configuration of Advanced
System
Event
Speed.
TEMP ALARM
Displays Events recorded generated by the configuration of Advanced
System
Event
Temperature.
MD ALARM
Motion Detection. NOT SUPPORTED
BD ALARM
Blind Detection. NOT SUPPORTED
VL ALARM
Displays Events recorded generated by Video Loss. Video Loss needs to be enabled for this event to
be recorded.
PANIC BUTTON
Records and Event based on the drivers pressing of the Driver Alert Panel button. The Driver Alert
Panel can be configured to Mark a specified amount of time prior and after the Driver Alert Panel
button being pressed.
Table 6: Event File Type Definitions.
In Figure 17 File Type was set for ALL and the result of the search displays the two events VL (Video Loss) and Over Speed.
Both of these events have been selected in this screen as can be seen by the X
listed under the SEL column. With a USB drive connected to the front of the 304-
SD Export can now be selected using the remote control.
A dialog window will appear displaying the status of the Export.
Figure 17: Event List
SEL
Selects which file in the Event List to backup.
EVENT NAME
The name for the Event e.g. VL video loss.
DATE
Displays the date when the Event occurred.
TIME
The start time when the Event occurred.
REV
If ALL files are required for exporting use the Remote control to highlight REV and press Enter. This
will Select ALL files for Exporting and an X will display under the SEL column for all files.
EXPORT
Export the selected Files to external USB drive connected to the front of the 304-SD.
Advanced Configuration.
There are six menu options listed under Advanced Configuration.
SYSTEM
DATE TIME
Please refer to the Date / Time section listed in the Quick Configuration section of this
guide.
GENERAL
On/Off Type
Options: Ignition/Timer/Ignition or Timer.
Determines how the 304-SD begins power up.
Default: Ignition
Shutdown Delay
Determines how long the 304-SD will continue to record after the Ignition signal has
