12
Note for installation.
Note:
7.
The using voltage for this equipment must be coordinated with the supplied voltage.
8.
User should install a suitable power switch and breaker switch near the fryer.
9.
At the back of the equipment is the earth bolt. Please connect the earth wire in compliance
with the safety regulations reliably with copper cable of no less than 2mm2.
10. Before using, check whether every connection is formed, voltage is normal and ground
connection is safe.
11.
Do not use water to clean the electric box directly.
12. The installation of this machine must be done by professionals.
-
This equipment must be operated by trained cook or professionals.
-
Do not reassemble! Reassembling this product can cause serious accidents.
-
Do not clean the product with a water jet or soak electric box into water while cleaning.
Water can conduct electricity so the product may cause electric-shock accident by electric
leakage.
-
The high temperature can cause burns. When the oven is in operation and before or after use,
do not touch the inside of the bowl and basket directly due to the high temperature.
-
Do not use another power supply with different voltage.
Do not use main switch that is not coordinated with safety regulation.
-
When thunder and lighting is closing, user should shut off main switch to avoid
appliance being damaged by lightning strike.
-
Do not use hard, sharp objects to avoid damaging the surface of the tank and the basket.
-
After using, please shut off main switch
-
The installation and maintenance of the electrical circuit has to be carried out by professionals.
-
If the power cable is damaged, to avoid danger, the user must ask the manufacturer or
maintenance department or specific professionals to replace it.
7.
After working, please rotate the temperature controller counterclockwise to primary position
and cut off power for safety’s sake.
8.
1) Please pour the old oil out of pot when temperature of oil lowers to normal.
2)
First, cut off power, then take the partition board for oil out of pot, and then electric box
out of the back notch in bottom box, Electric heating tube and electric box are separate from
oil pot ,and put them on a clear place, then take out oil pot to clean.
9.
To make sure the machine is safe and durable; User should clean slag of oil pot and filth of
electric heating tube in order to keep the oil pot and electric heating tube is clean.
10. The partition board of oil pot is designed for protecting electric heating tube. Put the board into
the oil pot when frying food.
11.
1) there is temperature in electric box; the moving temperature is 230°C.
2)
There is “reset button for overheating” out of the shell. When temperature is over, the
protecting button works. Press the reset button to restart.
12. There is a micro-limit switch in the electric box. When put electric box into bottom box,
electricity get to the electric box ;take it out then power is off.
13. Please use fresh vegetable oil in case of over boiling. Do not use old oil because it will have a
reduced flashpoint and be more prone to surge boiling.
