Gastrodomus AV8C, Инструкция по установке, эксплуатации и обслуживанию

Страница: 15 / 40

cod.W010771-rev.1 Pag. 15 05/06/2021
DISPLAY
1 Parameters menù/confirm 10 Brine e slow rinse phase 3
2 Manual Regeneration / exit 11 Setting
3 Down button 12 Button lock
4 Up button 13 Day
5 Service 14 Water treated capacity (m^3)
6 Backwash phase 2 15 M^3/h in service
7 Fast rinse phase 5 16 Regeneration time
8 Time 17 Display
9 Brine refill phase 4
START-UP
When commissioning the appliance it is necessary:

Open the cock supplying the softener.

Open a cock for air inside the ducts bleeds and the resins are washed. The outlet water may, for a few minutes,
be dark coloured. Leave it to run until is “cleaned”, before using it.

Check for leaks from the hydraulic connections.

Connect the transformer plug to the specific socket in the rear part of the valve.

When switching on for the first time, wait that the valve goes to the service position, the display indicates “-00-“

Set the time: by pressing key 1 you enter on menù and the first parameter found is the time. To modify it, press
key 1 and choose the hour with keys 3 and 4. Press key 1 to move to the minutes, choose the correct value with
keys 3 and 4. Once finished, press key 1 to confirm, then key 2 to exit programming.
WARNING: when the indicator 12 lights on, the buttons are locked
For unlocked, press and hold the button 3 and 4 for 5 seconds