
43
Step 5:
Slide the food pusher down the feed chute by aligning
the groove of the food pusher with the small protrusion on
the inside of the top of the feed chute. Continue to slide
the food pusher down the feed chute (5). Slide the food
pusher all the way down the feed chute.
Step 6:
Place the pulp container into position by tilting the motor
base slightly to the right. Insert the container under the
juicer cover on the left-hand side ensuring it is supported
by the container support extending from under the motor
base (6).
Note:
To minimise cleaning, line the pulp container with
a plastic freezer bag to collect the pulp. Pulp can then
be used in other dishes, or as compost for the garden or
discarded.
Step 7:
Place the juice jug underneith the spout.
OPERATING YOUR DESIGN JUICER
WARNING:
Make sure the appliance is completely assembled and that there
are nor foreign objects in the feed chute before putting the plug into the power point.
Never put fingers, wooden spoons or other foreign substances (such as hair,
clothing, brushes, cloth) into the feed chute.
Always turn the appliance off and wait for the motor to stop moving before removing
the lid of the juicer.
Keep the working place clean and dry. Do not let any liquids or water run into the
motor block.
Do not put any cloth or napkins underneath the appliance to avoid endangering by
fire and voltage. In case that water or other liquids ran into the motor block while
operating turn off the appliance immediately, pull the plug and dry the appliance
with a clean cloth. Operate according to the instructions ´Trouble shooting guide`
Step1:
Wash your selection of fruit and vegetables before juicing.
5
6
Содержание Design Juice
Страница 32: ...32...