63
CAUTION:
Always ensure that the dark drive coupling at the upper end of the
bar blender is completely clean and dry, before installing the bar blender at the
motor unit to avoid damage to the motor unit.
Do not remove the bar blender
during operation to avoid damage to the drive wheel and coupling.
Important:
It is crucial to hold the bar blender straight upright during operation.
The blades of the bar blender are spinning very fast and could hurl out your
food, when tilting the bar blender during operation.
Installing the Bar Blender
Note
The drive compartment is protected by an automatically closing shutter. Before
attaching the bar blender to the motor unit, you must push the shutter open.
1. Ensure that the drive coupling of the bar blender (dark shaft end) is completely
clean and dry.
2. Use the dark shaft end of the bar blender to push open the shutter. Then push the
bar blender shaft into the drive compartment onto the drive wheel of the motor unit.
3. Turn the bar blender clockwise to the stop. With the bar blender engaged tan-
gibly into position, the bar blender is ready for operation.
Processing via the Bar Blender
WARNING:
Do not hold your hands or any type of foreign objects (e.g.
cooking utensils) onto the blender blades with the bar blender installed at the
motor unit.
CAUTION:
If the motor slows down noticeably during operation or stalls,
immediately switch OFF the appliance (release the “Pulse” button, slide the speed
selector to “0”). Remove any obstacles. Please, adhere to the instructions in chap-
ter ‘Solving Problems’.
