59
manually to avoid damage to the drive.
Ensure to place the motor unit on a level,
flat, stable, and dry surface. Do not place the motor unit near the edge of the wor-
king space or on inclined surfaces.
Always hold the mixing container with one
hand during operation
, because it could vigorously move around due to the agi-
tating accessory.
Always keep your workspace clean and dry during operation. Immediately wipe off
spilled liquids or splashes using a dry cloth. Do not place the motor unit on wet or
moist surfaces or on any clothes. Do not let any liquids run under or on the motor unit.
If any liquids ran into the motor unit, immediately unplug the motor unit. Then clean
and dry the motor unit (see: ‘Care and Cleaning’). If in doubt, contact an autho-
rised service centre for examination. To avoid overflow: Do not overfill the mixing
container. Observe the MAX grading lines on the blender container and chopper
container. However, in many cases,
you should not fill in the maximum amount
to avoid splashing.
Do not use the chopping system for processing liquids, because
liquids may run out from under the chopper lid.
The appliance is not suited for processing hot or inflammable food (e.g. high-proof
alcoholic beverages). Steam escaping from your food may damage the motor unit
during operation by condensation on the inner parts. Always leave your food cool
down to max. 60°C (feels hot to the touch but will not burn immediately when
touched).
Always remove the motor unit from the chopper lid, before removing
the chopper lid.
To avoid high risk of severe injuries due to the chopper knife: do
not attempt to use the chopper knife without the dedicated chopper container and
chopper lid. Ensure that the chopper system is assembled completely and correctly.
CAUTION:
Do not remove the used accessory from the motor unit with the
motor still turning, to avoid damage. Always switch OFF (speed selector to “0”)
and wait for the accessories to stop complete, before removing the accessory out
of the food. Unplug the motor unit, before removing the accessories from the motor
unit. To avoid injuries, damage, and overheating, do not operate the appliance
without any food. Always insert the assembled accessory into your food, before
switching on the motor.
During operation, do not touch the assembled accesso-
ry with your hands, and do not hold any foreign objects on the accessory.
Tip:
You may store food within the blender container. For this, close the container
with the provided lid. However, do not leave any food in the blender container
go off or dry on the surfaces (see: ‘Care and Cleaning’).