
59
BEFORE FIRST USE
WARNING – RISK OF CHOKING:
Always ensure that young children do
not play with any packaging material of the appliance!
Do not leave young
children without supervision with the appliance, any part of it, or the packaging in
their reach. During operation, some parts of the appliance will get very hot, espe-
cially the brewing arm, filter basket, carafe, and warming plate and hot steam and
hot water may escape. Always switch OFF (ON/OFF button gets dark), unplug
and wait until the appliance cooled down, before cleaning or moving the appli-
ance. Always remove the carafe from the appliance, before moving the appliance.
Otherwise, the carafe could fall.
1. Remove and discard all promotional labels, stickers, and packaging materials
attached to your DESIGN BREW ADVANCED, but do not remove the model
label.
Always ensure that young children do not play with any parts or acces-
sories or the packaging!
2. Before discarding the packaging, ensure that you have found all parts and
accessories and all parts are undamaged. See: “Knowing Your Design Brew
Advanced”.
CAUTION:
Do not use any abrasive cleaners, cleaning pads (e.g. metal scou-
ring pads), or any corrosive cleaners (e.g. solvents, disinfectants, chemical bleach)
for cleaning. Do not use any hard or sharp-edged objects for cleaning the appli-
ance.
Do not place the appliance in an automatic dishwasher.
3. Clean filter basket, filter cover, carafe with carafe lid, water tank lid and brew-
ing arm in warm, gentle dish water. Rinse well, than wipe dry (see: “Care and
Cleaning”).
4. Place the appliance on an appropriate working place near a suitable wall power
outlet (see: “Important Safeguards for Electrical Appliances”). Assemble the appli-
ance completely and correctly according to the instructions in section “Assem-
bling the Appliance”.
5. Before first use, you should rinse the brewing system several times. For this pre-
pare the appliance for operation, but without a filter bag and without coffee
powder (see: “Assembling the Appliance” and “Preparing the Appliance for
Operation”).
6. Fill the water tank with 1.25 litres of clear drinking water and replace the water
tank lid. Then switch ON the appliance and wait until the brewing cycle is
complete. Discard the hot water in the carafe and rinse the carafe with drinking
water.
7. Repeat step 6 two times. Thereafter, the appliance is ready for operation.