EN
EN
24
25
Problem
Possible Reasons
The Easy Solution
The juice spout is folded
up to the closed position.
Place a sufficiently large juice vessel under the juice spout (at
least 1/2 litres) and push down the juice spout for opening the
juice outlet of the juice collector. Leave the juices flow out.
The juice outlet of the jui-
ce collector is clogged.
Remove any obstacles clogging the juice outlet, before the
juice reaches the rim of the filter basket (see: ‘Operation /
Emptying the Filter Basket and Removing Obstacles’).
The juice splashes.
The juice collector is over-
filled.
During operation, always ensure that a suitable juice ves-
sel is placed under the juice spout and the juice spout is
in the lower open position. Ensure that the juice flows
freely out of the juice outlet of the juice collector. Remo-
ve blockages in time (see: ‘Operation / Emptying the
Filter Basket and Removing Obstacles’).
Liquid (juice) accumulates
under the appliance AND/
OR liquid runs out from
under the juice spout.
Immediately unplug the
appliance!
The juice collector is over-
filled.
Check the following items (see: ‘Operation / Emptying
the Filter Basket and Removing Obstacles’):
- Is the juice spout closed? Place a sufficiently large juice
vessel under the juice spout (at least 1/2 litres) and
push down the juice spout for opening the juice outlet
of the juice collector.
- Is the filter basket clogged or overfilled with pulp? Emp-
ty the pulp. If required, rinse the filter basket.
- Is the juice outlet of the juice collector clogged? Remo-
ve the obstacle.
The juice collector is lea-
king.
Replace the juice collector. Get in contact with your ven-
dor. Do not use the appliance, when any part of it is
damaged or leaking.
You find it difficulty to
take out the juice collector
AND/OR the juicing cone
cannot be removed.
At the back (side of the press arm) lift the juice collector
upwards a little. Then, if required, turn the juice collector
a little to and fro, until it comes out of the top plate of
the motor base easily.
The juicing cone sticks to
the drive shaft.
When residues of food get on the drive shaft or the interior of
the juicing cone, the juicing cone may stick to the drive shaft.
In this case, carefully pull the juicing cone straight upwards for
removing the juicing cone first. Thereafter, you can take out
the juice collector with the filter basket. Clean the drive shaft
and the interior of the juicing cone thoroughly, removing any
residues of food (see: ‘Care and Cleaning’). Ensure that the
drive shaft and interior of the juicing cone are clean, when
placing the juicing cone onto the drive shaft.
CARE AND CLEANING
WARNING
–
Always ensure that the appliance and all parts of it are out
of reach of children younger than 8 years.
To avoid injuries to persons and
damage to the appliance, always unplug the appliance before assembling or
disassembling any parts, and before moving or cleaning the appliance. Do not
touch the drive shaft or the juicing cone with your hands or any objects, and do
not insert any objects (e.g. spoons, spatula) into the filter basket, while the appli-
ance is connected to the power supply.
WARNING
–
Do not place the motor base or power cord in an automatic
dishwasher.
All parts coming into direct contact with food during operation, may
be cleaned in an automatic dishwasher. To avoid risk of electric shock: Do not place
or immerse the motor base or the power cord in water or other liquids. Do not pour
or spill any liquids onto the motor base or power cord. Do not place the appliance
or power cord on wet surfaces. Always immediately wipe off spilled liquids.
CAUTION
– To avoid damage, do not use any abrasive cleaners, corrosive
chemicals (i.e. disinfectants, bleach) or cleaning pads for cleaning the appliance
or any part of it. Do not use any hard or sharp-edged utensils for operation or
cleaning to avoid damage to the surfaces. The filter baskets could easily get bent
or may crack via careless handling, thus making them unusable.
Clean the appliance immediately after each use to avoid that residues of food stick
stubbornly to the surfaces and cause blockage, discolouration, and opaque stains.
Do
not poke or scratch with any foreign objects under the drive shaft, or in the juice
outlet of the juice collector, or in the joint of the press arm.
Do not use violence.
NOTE
After an elongated time of usage, some surfaces may build up discolouration and
opaque stains caused by fruit acids. This does not influence the performance of
the appliance or the taste of the juices.
CLEANING THE JUICING SYSTEM
1. Unplug the appliance and fold up the juice spout for closing the drip-stop. Remo-
ve your juice vessel.
2. Remove the juicing system from the appliance (see: ‘Disassembling the Appliance’).
3. Separate the parts of the juicing system and empty the filter basket and juice
collector. If required, remove residues of pulp from the filter basket via a rubber
spatula or wooden or plastic spoon.
