AUTO-switch: automaticaly
vacuum-packing followed by automaticaly sealing of the plastic bag
VACUUM-switch: manual
vacuum-packing
Control light
SEAL-control light green:
signals that the appliance is ready for use
Control lights - manual vacuum-packing:
Pressing the VACUUM-switch:
SEAL-control light blinks orange/Vacuum-Switch is constant green: the appliance is generating vacuum
Pressing the SEAL-switch for sealing the plastic bag:
SEAL-control light blinks rot/Vacuum-Switch is constant green:
the bag is getting sealed
VACUUM-control light is constant green:
vacuum procedure is finished
Getting the appliance ready for use
1. Remove all promotional materials and packing and place
the appliance on a convenient dry surface (explained in
the safeguards). Ensure you have enough space in front
off the appliance to lay down the plastic bag.
2. Pay attention that the vacuum chamber is properly
assembled. For successful operation the security lock of
the vacuum chamber has to be properly locked. The
lock has to be positioned fully on the left side (picture C).
If the appliance is not properly assembled the appliance
can not generate a vacuum.
3. Ensure that the gaskets and the grommet (on the lid) are
properly assembled. The gaskets have to lay properly inside
the guiding channel and the edges of the gaskets
should not overlap the channel (picture C).
4. Connect the appliance directly to a mains power supply
wall socket with protective conductor (earth/ground;
220/240 V, 50 Hz, AC, rated for 16 A).
The green indicator light
will turn on as soon as the plug is connected to the
power outlet. The appliance is now ready for use.
A
B
C
22
46011_DesignPlusVakuumierer_Manual.qxp 13.12.2006 10:27 Seite 22
