6. Press the AUTO-switch (picture E).
NOTE:
During the vacuum procedure you have to hold
on to the vacuum bell jar.
The appliance starts to operate. The AUTO-control light constantly shows a green
light while the SEAL-control light blinks orange. The appliance is generating vacuum.
After the vacuum procedure is finished the SEAL-control light blinks red. The red light
indicates that the appliance is in the sealing mode. The bottom is sealed when the
AUTO-control light constantly shows a green light. The food is vacuum packed in
the container.
When you want to open the container push the rubber seal outward until you hear
a hissing sound of air. The vacuum pressure will be released. Hold the seal for 2-3
seconds and then open the lid.
Care and cleaning
Remove the plug from the power outlet before cleaning and storing the appliance.
WARNING!
Allow the appliance to cool down, before cleaning the appliance.
Do
not
place the appliance or power cord in an automatic dishwasher.
Do not
immerse
the appliance or power cord in any liquids or spill any liquids on it. Always wipe off
spilled liquids immediately.
Do not
pour or drip any liquids on the appliance or
power cord.
Do not
place the appliance on wet or damp surfaces. When liquids
are spilled on the appliance, immediately unplug the appliance and dry the
appliance to avoid risk of electric shock or fire.
For easy cleaning – immediately after each use clean the appliance. This way no leftover food
will stick, burn-in or carbonise to the sealing band.
If necessary carefully clean the sealing band with a damp
sponge or cloth and warm soapy water.
Do not
clean the vacuum
sealer or any parts of it in the dishwasher.
Wipe the exterior of the vacuum sealer and power cord with a damp
soft cloth. Take care not to spill or drip water or any other liquids on the
appliance. If necessary you can take out the vacuum chamber for
cleaning. Take out the gasket by carefully pulling it up (picture A).
Slide the security lock of the vacuum chamber all the way to the right
(picture B) and take out the vacuum chamber (picture C). Clean the
vacuum chamber with a damp sponge or cloth and warm soapy water.
NOTE: Do not
clean the vacuum chamber in an automatic
dishwasher. Pay attention not to loose the sealing ring on the bottom
side of the vacuum chamber. The sealing ring is placed on the hose port.
27
A
E
C
B
46011_DesignPlusVakuumierer_Manual.qxp 13.12.2006 10:30 Seite 27
