Gastroback 42611, Руководство по эксплуатации, Страница: 67 / 84

67
POWER
A beep will sound to indicate that the temperature settings
can now be changed.
The LED of the last saved setting will be illuminated. See
table on left.
Pressing the 2 cup button allows you to toggle between
the different settings.
Please note that if the 2 cup button is not pressed within 10 seconds,
the machine will return to STANDBY mode and the above steps have
to be repeated
After you have made a selection, 2 beeps will sound to indicate that
your setting has been saved.
The machine will then return to STANDBY mode.
THE ART OF TEXTURING MILK
The appliance comes complete with a commercial style swivel steam wand.
• Fill the stainless steel frothing jug maximum ½ full with cold, fresh milk.
• Turn the steam selector dial to the Steam-position. The red steam light will start to flash
indicating that the machine is heating to create steam.
When the steam light stops flashing it is ready to use.
Before inserting the wand into the milk, pause the steam by returning
the dial back to the STAND BY-position. This will avoid splashing
the milk out of the jug (this pause function lasts for 6 seconds before
exiting steam mode).
• Insert the wand into the milk and return the steam dial back to Steam-position.
• To stop, return the steam dial to the STAND BY-position and remove the jug.
Note:
When the espresso machine creates steam, a pumping noise can be heard. This is the
normal operation of the 15 Bar pump.
Note:
After 5 minutes of continuous steaming, the machine will automatically disable the
steam function. The steam light will flash. When this occurs return the steam dial to the
STAND BY-position.