Gastroback 42442, Руководство по эксплуатации

Страница: 35 / 40

EN
35
Problem Reason The Solution
Too many lime deposits
on the heating plate. Descale the kettle in time to avoid overheating (see:
‘Care and Cleaning’).
The power socket or
power connector of the
power base or kettle are
damaged. Immediately unplug the appliance. Return the appliance to
an authorised service centre for examination and repair.
Do
not remove the kettle from the power base,
while the kettle is switched on , to avoid damage
to the electrical connectors. Switch off the kettle first (on/
off switch gets dark).
The water is boiling, but the
kettle does not switch off
OR the kettle switches off
belatedly. After first bubbles appear,
some seconds are required
for reaching the set tem-
perature. This is normal. The time duration until shut-off depends
on the amount of water in the kettle.
The lid is missing or not
close correctly. For operation, the kettle must be closed correctly via the
lid. Otherwise, the automatic shut-off cannot work pro-
perly. Press the lid onto the kettle until it engages with
a click.
CARE AND CLEANING
WARNING
– : Always ensure that the appliance and all its parts are
out
of reach of children younger than 8 years and animals.
Always unplug the
appliance and leave the kettle cool down, before cleaning the appliance. Do not
immerse or place the power base, power cord or kettle in water or any other
liquid. Do not spill or drip any liquids on these parts to avoid risk of fire and elec-
tric shock.
DO NOT place any part of the appliance in an automatic dish-
washer.
Do not poke in the electric connectors of the appliance (power socket of
the power base and connector of the kettle)! Do not use scouring pads or abrasive
or corrosive cleaning agents (e.g. bleach, solving agents) for cleaning the appli-
ance or any parts of it, to avoid damage to the surfaces and seals. Do not use
any hard or sharp-edged objects for cleaning.
IMPORTANT
– Descale the kettle, when lime deposits cover the heating
plate of the kettle (refer to the following section).
1. Leave the kettle cool down completely. Then rinse the interior of the kettle with
clear water. Regularly, clean the interior of the kettle via a soft nylon brush or cloth.
2. Wash the lid in warm dishwater and thoroughly rinse with clear water.