EN
27
storage.
Do not place the appliance on a power cord. The power cord
may not touch hot surfaces, moving parts, or sharp edges. Power cords
may never be knotted, twisted, pulled, strained or squeezed.
Do not let
the plug or power cord hang over the edge of the table or counter
.
Ensure that no one will pull the appliance by the power cord. Always
grasp the plug for disconnecting the appliance from the power supply.
• The electrical connectors of the kettle and the power cord must be
clean and smooth without discolouration. Always keep the electrical
connectors absolutely dry! Do not poke in the electrical connectors.
When they are damaged or polluted in any way, the appliance
may not be used again to avoid overheating an fire.
Do not touch
the appliance or power plug with wet hands, when the appliance
is connected to the power supply
. Always wipe off spilled liquids
immediately. Do not operate or place the appliance on wet, inclined,
or uneven surfaces or on metal surfaces (e.g. sink) or in a tablet or
pan. Do not place or immerse the power base or kettle in any liquids
or let liquids run onto the power base or exterior of the kettle. Always
ensure that the working surface and power base are completely dry,
before connecting the power base to the power supply.
• Switch off the kettle (on/off switch in the upper position), before
removing the kettle from the power base. Always remove the
kettle from the base for filling the kettle or pouring. Always open
the lid for filling the kettle.
• Before placing the kettle onto the power base, always ensure that the
exterior of the kettle is absolutely dry
. When liquids run out during
operation, or accumulate under the power base, do not touch the
appliance, but immediately unplug the appliance. Thereafter, clean
the appliance and let it dry naturally for at least 1 day (see: 'Care
and Cleaning'). If in doubt, check the kettle for leakage.
• Do not place any parts of the appliance into an automatic dish-
washer.
Содержание 42442
Страница 39: ...EN 39...
