35
with the solution. Seal the jug with the lid, turn the appliance on (switch position:
›1‹) and let it work for a few seconds.
3. Switch the appliance off (ON/OFF-switch position ›0‹ (AUS/OFF). Wait until the
blades have come to a stop, and remove the glass jug from the motor base.
4. Unplug the power plug from the outlet.
5. Remove the lid from the glass jar and pour out the detergent solution. Remove
residue on the walls of the glass jar. You can easily remove clinging residue with
a plastic cleaning.
WARNING:
Use extreme caution when working in the area of the blades; be
careful not to cut on the sharp blades and not to damage the blades.
Important:
In most cases, the glass jug will already be hygienically clean. However,
should food residues still are adhering to the knives, then disassemble the bottom of
the jug and clean the components individually.
6. Rinse the lid and the beaker in warm detergent solution.
7. Rinse the glass jug, the lid and the beaker afterwards with clean water, dry the
parts with a dish towel gently and let it dry out of the reach of small children at
the air.
DISASSEMBLING THE GLASS JUG AND REMOVING STUBBORN RESIDUE
WARNING:
The blades of the knife are very sharp. Treat the blades carefully
and without violence, be careful not to cut on the sharp blades and not to damage
the blades.
8. Keep the glass jug over a sufficiently large bowl, turn the mount to the left and
remove knifes and the sealing ring downwards.
9. Rinse all parts of the mixing jar in warm detergent solution. Soak the stubborn
food residues on the parts for a few minutes and then remove these with a small
plastic brush or sponge. While doing so be careful not to cut on the sharp
blades.
10. Rinse the parts of the glass jug with clear water and dry the parts afterwards with
a clean cloth gently. Let the parts (especially blades and bottom of the jug) dry
in a protected and inaccessible to small children area at the air. Place the parts
back together after drying (see: ›Assembling the glass jug‹).
