background image

4

5

Burner Operation & Ignition system check

Nominal Hourly Gas Consumption

Gas Type

Number of 

Burners

Injector Size 

Main Burner

Total Gas  

Consumption

MJ/h

Gas

Pressure

kPa

Propane

1

1.25mm

21 MJ/h

2.75 kPa

Natural Gas

1

2.3mm

22 MJ/h

1kPa

Problem

Possible Reason

Solution

Burner will not ignite

Valve on cylinder is closed

Open valve on cylinder

Control knob is closed

Turn knob to high when lighting

Igniter is faulty

Use a long barbecue match

Food is not cooking 

or is taking too long

Burner has gone out

Check that the gas bottle is not 

empty and re-ignite the burner

Oven was not given enough time to 

warm up before the food was applied

Remove the food and give the burner 

time to pre-heat (5-15 minutes)

There is too much food on the 

cooking surface

Cook smaller portions

 

IMPORTANT

• 

Note:

 If the appliance cannot be adjusted  

  to perform correctly it should not be used  
  until serviced or repaired.

•  The door must be in the open position for  
  lighting.

•  Do not smoke when attempting to ignite  
  burner.
•  Do not leave the appliance unattended when  
  alight.

• 

Warning:

 Improper installation, adjustment,  

  alteration, service or maintenance can cause  
  injury or property damage. Any modifications  
  or adjustments made to product without prior  
  authority from the manufacturer will void any  
  warranty claims. Read the installation,  
  operating and maintenance instructions  
  thoroughly before installing or servicing this  
  equipment.

Содержание P0104













Отзывы: