GASER PRACTIC 350, Руководство пользователя

Страница: 17 / 46

-17-
8. MAINTENANCE
1. Periodically check the condition of all moving parts: belt, rollers, gears and bearings.
2. Periodically check the condition of the gear motor, stirrer motor and turbines.
3. Periodically check the general condition of the machine.
4. If any of the rods on the wire mesh belts break, replace the broken rod with a new one using a
connecting tube. The connecting tube must always be situated where there are no rollers.
Image 24. Belt rod repair
5. When reassembling the belt on its chassis, remember that the smooth side is the upper face and
that the wire points must always face in the opposite direction to the motion.
Image 25. Belt fitting